Hydraulic Reversible Vibratory Plate, 160 kg, CIMEX RCP160H Rental Series

Hydraulic Reversible Vibratory Plate, 160 kg, CIMEX RCP160H Rental Series

The hydraulic, reversible vibratory plate CIMEX RCP160H Rental Series is designed for compacting embankments, gravel, soil and rock mass, felt, asphalt, and other inert materials.
Suitable for compacting sloped surfaces. With an effective compaction depth of 50 cm, the CIMEX RCP160H finds wide application in foundation preparation before pouring concrete, for paths, sidewalks, road repair, and other tasks.

For maximum performance and control, especially in excavations, the reversible vibratory plates have two travel modes – forward and reverse, enabling work in tight spaces. The throttle lever is conveniently located near the handle. The direction of movement is changed by moving the handle forward or backward.

The cast iron working plate is treated with a special process for maximum self-cleaning and reduced material sticking. Dimensions are 700 x 520 mm, and the width can be reduced by 80 mm on each side for working in narrower spaces.

The gearbox housing is made of cast iron, providing both strength and additional weight. All gearbox components operate in an oil bath for optimal lubrication and reduced wear.

Power is transmitted from the engine to the gearbox via a reinforced centrifugal clutch and belt drive, with moving parts protected by a cover. Driven by a 9 HP four-stroke gasoline engine with air cooling. Protective frame shields the engine and chassis.

For easy transport, the CIMEX RCP160H features a curved frame allowing loading and unloading with lifting equipment.

Years of experience in developing compaction machines confirm that CIMEX RCP160H combines reliability and high productivity with precise control.

Advantages:

• High reliability

• Low operating costs

• High productivity – 238 m²/h

• Compact dimensions

• Excellent balance and even impact distribution

• Effective compaction depth: 50 cm

• Cast iron plate with high wear resistance

• Reliable direction change system – hydraulic

• Conveniently positioned reverse lever – forward/reverse

• Protective frame

• Anti-vibration pads

Technical specifications:

• Centrifugal force: 30.5 kN

• Plate size: 700 x 520 mm

• Speed: 24 m/min

• Compaction depth: 50 cm

• Compaction efficiency: 238 m²/h

• Maximum slope: 25 %

• Vibration frequency: 4810 vpm

• Dimensions with packaging (L x W x H): 800 x 510 x 1270 mm

• Weight: 160 kg

Engine:

• Fuel: Gasoline

• Engine type: 4-stroke

• Power: 9 HP

• Cylinders: 1

• Cooling: Air-cooled

• Starter: Manual