Mobile dehumidifier / dehumidifier CIMEX DH50

Mobile dehumidifier / dehumidifier CIMEX DH50

Mobile dehumidifier CIMEX DH50 — Moisture trap / moisture absorber - professional, a dehumidifier designed for everyday use, specially developed for the needs of construction and finishing works. With a capacity of 50 l/day, the mobile dehumidifier is ideal for drying rooms after plastering, plastering and painting and other materials applied by wet processes. Humidity control is essential for parquet flooring! With the help of the powerful CIMEX DH50 mobile dehumidifier, you can achieve the ideal conditions you need in a controlled environment. Designed for daily use and equipped with a built-in hydrostat, the dehumidifier does an excellent job of absorbing moisture from storage rooms, archives, gyms.

The principle of operation of the moisture trap (also called dryer, moisture absorber) is expressed in the removal of excess moisture through condensation and inside the machine, through cooling elements. Air contact with cooling elements leads to moisture condensation. The condensate separated in the process is collected in the built-in tank, and the dried air passes through a condenser and is heated to a temperature slightly higher than that of the environment (air in the room).

The all-metal body of the dehumidifier has practical wheels and a handle for easy transport and repositioning of the machine. With a weight of only 36 kg, thanks to the wheels and the handle, the CIMEX DH50 professional whale trap can be easily moved, even if steps and bumps have to be overcome.

The built-in, in the lower part of the housing, water tank has a volume of 5.5 liters and is equipped with a float, which, when the vessel is filled with water, turns off the moisture trap and activates a light signal on the control panel. If it is necessary to operate the dehumidifier continuously or around the clock, or to operate in very high humidity, a hose can be connected to the water tank to drain the water into a channel or outside the room. This allows continuous operation of the mobile moisture trap, without the need to shut down for service.

The power button is located on the right edge of the control panel. When the button is pressed, the dryer is switched on in continuous operation mode. The humidity value set in this mode of operation of the dehumidifier is 50%.

Next to it is the timer setting button. It performs several functions – when the dehumidifier is in standby mode (not included in operating mode) it can be used to set the time after which it will be switched on –delay start function. In operating mode, through this button, you can set the time after which the moisture trap will turn off -delay stop function

On the left is an indicator for filling the built-in 5.5 liter water container. Next to it is the button for activating the long drying mode. It is important to know that this mode of operation is semi-automatic - you can set a duration (time) for operation, but you cannot set a dehumidifier shutdown value when a certain humidity value is reached.

Key advantages

• Humidity controller in 5% steps from 20% to 90%
• Built-in automatic "Defrost" system
• Large flow rate 450 m3/h
• High productivity 50 l/day
• Low noise level - <52 dB
• Easy cleaning
• Large water tank with automatic shut-off when full
• Air filter

Applications

• Drying of premises during construction activities
• Drying of premises after floods and accidents
• Warehouses
• Archives
• Sports halls
• Gyms
• Spa centers
• Restaurants
• Offices

Technical specifications

• Capacity (30oC/80% RH): 50 liters/day
• Processed air flow: 450 m3
• Operating range - humidity: 20-90 Rh
• Operating range - temperature: 5-35 degrees
• Refrigerant: R290 / 230 g.
• Power supply: 220-240 V/ 50 Hz
• Noise level: <52 dB
• Compressor: rotary
• Tank volume: 5.5 l
• Power consumption: 650W
• Dimensions with packaging (L x W x H): 430 x 515 x 825 mm
• Net weight: 36 kg