Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L

Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L

Three-motor vacuum cleaner for dry and wet cleaning with a waste container volume of 80 l. With a power of 3.0 kW, the CIMEX VAC80L is the ideal solution for cleaning dust, water, sawdust and other contamination in factories, warehouses, construction sites. To achieve maximum convenience when cleaning large rooms, the vacuum cleaner for dry and wet cleaning is equipped with a textile dust separator, which allows the vacuum cleaner to be used without a filter bag, even when vacuuming fine dust.

Thanks to its high air flow rate, the dry and wet vacuum cleaner copes with the suction of water without any problem, and the stainless steel container is equipped with a hose for easy water drainage with a channel.

The three motors are located in the upper part of the vacuum cleaner, which can be switched on separately. An important element contributing to the reliability of the machine is that the engines are self-cooled– i.e. they are not cooled by the intake air, but their cooling fins, intake air from the environment.

In dry suction mode, the vacuum cleaner is used with a dust separator (cover) made of textile included in the standard and complete set. In this way, the suction of construction waste with sharp edges, shavings and shavings cannot damage the machine. The collected waste is collected in the container and after dismantling the separator, it can be thrown away.

In water suction mode, the vacuum cleaner for dry and wet cleaning is used without a separator. In this case, the collected water is collected directly in the container, and when filling its useful volume with water, a float closes the suction, so as to protect the electric motors of the machine from getting water.

Thanks to the curved shape of the suction pipes, the adherence of the floor nozzle to the cleaned surface is significantly improved and fatigue is reduced during operation, since the center of gravity is shifted lower to the cleaned surface.

The corrugated hose has a length of 4 meters, which greatly facilitates the operator's work.

In conclusion, we can say that the SIMEX VAC80L has the necessary power and volume, combined with ergonomics and ease of use, necessary for cleaning large areas.
This industrial water-vacuum cleaner is suitable for use in production, construction sites, cleaning after repair work, working with machines, warehouses.

Technical specifications

• Supply voltage: 230V / 50Hz
• Power: 3.0 kW
• Container volume: 80 l
• Air flow rate: 106 l/sec.
• Vacuum: 200 mbar
• Cable length: 4.5 meters
• Hose length: 4 meters