Menu
Your Cart

Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L

Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
BEST SELLER
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L
329.69€
With VAT: 395.62€
  • Availability: In Stock
  • Model VAC803

Vacuum cleaner for dry and wet cleaning 3.0 kW, CIMEX VAC80L

Triple motor vacuum cleaner for dry and wet cleaning with a waste container volume of 80 l and a capacity of 3.0 kW, CIMEX VAC80L is the ideal solution for cleaning dust, water, sawdust and other contaminants in industries, warehouses and construction sites. For maximum convenience, when cleaning large rooms, the vacuum cleaner for dry and wet cleaning is equipped with a textile dust separator, which allows the vacuum cleaner to be used without a filter bag, even when vacuuming fine dust.

Thanks to its large air flow, the vacuum cleaner for dry and wet cleaning handles the suction of water without any problems, and the stainless steel container is equipped with a hose for easy drainage of water with a channel.

At the top of the vacuum cleaner are the three motors, which can be switched on separately. An important element contributing to the reliability of the machine is that the engines are self-cooling - ie. they are not cooled by the sucked air, but their cooling fins suck air from the environment.

In dry suction mode, the vacuum cleaner is used with the dust separator (cover) made of textile included in the standard equipment. In this way, the suction of construction waste with sharp edges, sawdust and shavings cannot damage the machine. The collected waste is  in the container and after dismantling the separator, it can be disposed of.

In water suction mode, the vacuum cleaner for dry and wet cleaning is used without a separator. In this case, the water is collected directly in the container, and when filling its useful volume with water, a float closes the suction so as to protect the electric motors of the machine from water ingress.

Thanks to the curved shape of the suction pipes, the adhesion of the floor nozzle to the cleaned surface is significantly improved and fatigue during work is reduced, as the center of gravity is shifted lower to the cleaned surface.

In conclusion, we can say that CIMEX VAC80L has the necessary power and volume, combined with ergonomics and comfort, necessary for cleaning large areas. This industrial water vacuum cleaner is suitable for use in production, construction sites, cleaning after repairs, work with machines, warehouses.

Specifications:

  • Supply voltage: 230V / 50Hz
  • Power: 3.0 kW
  • Container volume: 80 l
  • Air flow: 106 l / sec.
  • Vacuum: 200 mbar
  • Cable length: 4.5 meters
  • Hose length: 4 meters

Write a review

Note: HTML is not translated!
Bad Good

Related Products

 The new professional wall and ceiling sanding giraffe DWS220N enriches CIMEX's sanding mac..
176.34€
With VAT: 211.61€
Sanding machine for walls and ceilings CIMEX DWS225H  - is intended for daily professional..
94.56€
With VAT: 113.47€
Giraffe-type sanders are machines designed for  final smoothing of plastered walls and cei..
253.01€
With VAT: 303.62€
Three-motor vacuum cleaner 3.6 kW, CIMEX DVAC30LThree-motor vacuum cleaner for dry and wet clean..
1,786.44€
With VAT: 2,143.73€
Attachment (for water jet) for cleaning floors - with 2 guns and 4 additional nozzlesThe FC500-P..
478.43€
With VAT: 574.11€