CORDLESS DRILL DRIVER BATTERY SCREWDRIVER CIMEX CD18V58NM-T

CORDLESS DRILL DRIVER BATTERY SCREWDRIVER CIMEX CD18V58NM-T

CIMEX CD18V58NM-T Cordless Drill is powerful and convenient battery screwdriver, offering a combination of ergonomics, low weight and high performance. With a torque of 58 Nm and 2.0 Ah lithium-ion battery, this 18 V Cordless Drill has a variety of work applications - a responsible assistant for furniture installations, metal structures mounting, woodworking, drywall assembly and many others.

The Cordless Drill is designed for professional use and it is extremely balanced so that the operator's arm does not get tired. Rubberized handle elements provide a secure and stable grip during long-time work.

When choosing a Cordless Drill based on technical characteristics and comparing it with other models, the main parameters are usually two - torque amount and battery capacity.

The benchmark for batteries was considered a significant power indicator - battery voltage, with battery technology progress can now be ignored. We usually meet on the market battery-powered screwdriver with 18-20V battery to provide a humble torque of 30-35 Nm…

CIMEX CD18V58NM-T is a Cordless Drill with a torque of 58 Nm. Very few machines by this class can be proud of similar power values. The high torque reveals additional capabilities. Whether you are screwing wood screws, self-tapping metal screws, screws for concrete (AMO screws for direct mounting), the Cordless Drill will handle it. Wood and metal bore sawing is also effective.

The battery has a 2.0 Ah / 18V Li-Ion capacity and provides plenty of time to work with a single charge. Of course, operational time with a single charge is a relative measure depending on how the operator exploits the Cordless Drill. Usually, the battery life is extended when you screwing fittings in wood, but when you bore drilling in wood the energy consumption is much higher. Same high consumption is typical for deep metal drilling and screwing fittings over 150mm length. The battery controller is integrated directly into the battery and is regulating every peak of the electricity. This controlling board allows charging control and the following extra features - deep discharge protection, recharging protection, overload protection during operation and it is optimizing quick charging. All of these is providing 60 minutes charge up to 100% full capacity of 2.0 Ah battery.

An additional battery "extra" is the ability to use as a Power Bank for every cell phone, tablet or smartwatch. This is done by an integrated USB port on the back side of the battery. If you need you could use not only for charging the dead battery of your phone, directly on the construction site, but also to attach additional lighting.

The Cordless Drill full-metal chuck has a maximum clamping range of 13 mm. Quick change mode of the chuck allows bit replacing at the moment – QuickLock system. The clamping jaws have a special shape (with an additional lead) allowing the direct and precise grip of bits without the risk of scrolling inside the clamps.

The 15 steps of changing torque enable optimum torque control depending on the application. With proper adjustment, you could assemble from small screws up to heavy drilling in tough materials.

The mode selection switch is a two-stage – drilling and torque control (15 steps)

In drilling mode, the Cordless Drill can be used drilling holes in metal, wood and other materials.

Using mode turn/reverse with 15 steps of torque control is allowing torque reduction to avoid overturning of screws in materials. It is also really helpful for controlling the depth of screw mounting.

Considering that the Cordless Drill is designed for professional use, every component used for gear construction is selected with high importance for its reliability. The CIMEX CD18V58NM-T Cordless Drill has a full metal gear. All internal planetary and peripheral wheels are made of precision hardened steel with surface ionization. This technology ensures long service life and high wear resistance of every component.

Equipped with dual speed mode, the gearbox allows the idling speed to be expanded from 0 to 400 rpm at a 1st speed and 0 to 1500 rpm. at 2nd speed.

The drive of the Cordless Drill is coming by a powerful and reliable Japanese Mabuchi electric motor. Engines with this Japanese brand are preferred by a number of leading power tool manufacturers.

The Cordless Drill trigger has a sensitive, stepless speed adjustment. Above it, there is a switch for changing the direction of rotation – reverse mode.

Above the trigger there is built-in LED light, allowing the operating area to be visualized clearly. The LED lighting is turning on automatically when the trigger is pressed.

The Cordless Drill housing is solid, made of impact-resistant plastic with rubberized elements.

The rubber casing not only protects the Cordless Drill body but also provides excellent slip protection when placing the machine on sloping surfaces. It is important especially if you are working on roofs. When putting down the machine you can be sure that the rubber pad will not allow to slip the machine down. The will hold still the body and will handle the weight of the Cordless Drill.

Feature:

• High torque
• Battery with large capacity
• Power bank function of the battery with USB port
• Battery capacity Indicator – 3 level lighting
• Potentiometer trigger – „Sensitive trigger“ type
• Quick charger – adapter type
• Full-metal chuck with a mechanism for quick locking
• Dual speed, full-metal gear
• Japanese heavy-duty electric motor
• Integrated LED lighting
• Solid rugged body with rubber pads
• Excellent balance

What’s included:

• Cordless Drill CIMEX CD18V58NM-T – body 1 pc.
• Battery 18V/2.0 Ah Li-Ion – 1 pc.
• Quick charge – 1 pc.
• Belt clip – 1 pc.
• Plastic case for transportation – 1 pc.
• Magnet bit holder – 1 pc.
• Bit set - 1x PZ1, PZ2, PH1, PH2, SL5, SL6
• Drill set – 6 pcs.

Specifications:

• Torque: 58 Nm
• Battery Voltage: 18V DC
• Battery Chemistry: Li-Ion
• Battery capacity: 2.0 Ah
• NO load RPM (1 speed): 0 - 400
• NO load RPM (2 speed): 0 – 1500
• Chuck steps: 18 + Drill mode 
• Reverse: Included
• Chuck clamping range: 0 - 13 mm.
• Battery/Charger: 1,5 А
• Charging type up to 100% for battery capacity 2.0 Ah: 60 min