Double trowel for concrete 2x80 cm., petrol CIMEX Trowelmax 160

Double trowel for concrete 2x80 cm., petrol CIMEX Trowelmax 160



The CIMEX Trowelmax 160 petrol double power trowel is a highly effective solution for smoothing and grinding of vibrated concrete. It produces a dense, smooth and durable surface. Thanks to the double working mechanism, the machine processes areas twice as fast compared to single models, significantly reducing the physical effort of the operator. At the same time, it eliminates the need for walking and manual guidance, making it a practical choice when working on large concrete areas.

The double power trowel CIMEX Trowelmax 160, offers a working width of 1600mm with trays and 1500mm without trays, providing even coverage and a solution for areas up to 800 m².

The Trowelmax 160 is driven by a powerful LONCIN 420 gasoline engine with 13 hp. and a working volume of 420 cubic cm. It's the engine single cylinder, four stroke (OHV), with optimized fuel consumption providing economical and efficient operation even under prolonged loads. It is equipped with electric and manual starter, ensuring a reliable start in all conditions. The tank has a capacity of 6.5 liters allows continuous operation without frequent recharging. Additionally, the machine has built-in hour meter, which allows easy tracking of working hours and maintenance planning, thereby extending the engine's service life.

Torque from the engine is transmitted via a belt drive with two belts. This provides additional reliability – even if one belt breaks, the machine will continue to work without having to stop immediately for repairs.

The CIMEX Trowelmax 160 double trowel is equipped with front and rear LED lights (headlights) that provide excellent visibility during operation. Thanks to LED technology, the lighting is energy efficient, with low power consumption, but with high brightness, providing uniform lighting of the work area. This allows the operator to work precisely even in low light or at night, as reduces eye strain and increases the safety of the work process.

All machine controls are conveniently located to the driver's right, providing quick and easy access during operation.

The control panel includes:

• Fuse – protects the electrical system from overload.
• LED light switch (Light switch) – activates the front and rear LED lights.
• Ammeter (Current table) – monitors the electrical current in the system.
• Power indicator light – shows the status of the power supply.
• Motorcycle watch (Time table) – keeps track of hours worked for timely maintenance.
• Started the door lock – ensures safe engine start.
• Main switch (Power switch) – controls the switching on and off of the machine.

This control panel arrangement allows the operator intuitive control, easy access to all essential functions and increased safety, without being distracted from the work process.

The perdashka has a built-in water tank and a misting system, providing controlled moistening of the concrete surface. The two specially located spray nozzles, installed on both sides of the driver, guarantee uniform coverage of the work area, preventing excessive drying of the concrete during processing. The misting system is activates easily with a button located on the right joystick, which allows precise control over the amount of water without interrupting the work process. This improves the quality of the finished surface and reduces the likelihood of cracks.

The CIMEX Trowelmax 160 has an extremely simple and reliable mechanical control, without any hydraulic elements. Thanks to the two control levers, the operator has full control over the movement of the machine – forward, backward, turning left and right, as well as rotation around the axis. Additionally, control is via a single pedal located on the right, which performs the function of gas regulator – the more it is pressed, the greater the acceleration is obtained. This allows flexible regulation of revolutions according to the needs of smoothing. For increased safety, on a stop button is located on the left control stick, who plays the role of emergency switch.

The mechanical control system provides lower maintenance and longer service life, as it eliminates complex and failure-prone hydraulic components. That's what working with the machine does more reliable, precise and easy even for operators with less experience.

The blade angle of the CIMEX Trowelmax 160 can be adjusted from 0 to 15 degrees, providing precise control over the smoothing of concrete. The setting is done via two independent screw adjustments, located on both sides of the operator. Regulation is fast and convenient – for increasing the angle rotates the left knob clockwise, a the right one – counterclockwise. For reducing the angle, the process is reverse. For extra durability and smooth movement, the blade holders are equipped with grease nipples, which allows easy lubrication and reduces mechanism wear.

This one precision tuning system allows adapting to different stages of work – smaller initial smoothing angle and larger angle for final sanding and polishing. Thanks to convenient management, the operator can to quickly adjust the pitch of the vanes without interrupting the work process, which improves the efficiency and quality of the finished surface.

For easier moving of the machine, the CIMEX Trowelmax 160 is equipped with a set of transport wheels and a hitch for manual movement. The wheels are rolling install and remove extremely quickly and easily, without the need for additional tools, which makes it easier for the operator to prepare for transport or move between different work areas. This system significantly reduces effort, necessary to move the machine, and allows quick mobilization even when working on large sites, without the need for additional mechanization.

Despite its size and weight, the CIMEX Trowelmax 160 double trowel is extremely mobile and easy to maintain. The machine is designed with special lifting holes, which allows safe and convenient transportation by rope, pallet truck or forklift. This makes it easy to move it even in limited spaces or on higher floors when working in construction sites.

Extremely robust construction guarantees stability during operation, resistance to intense load and long service life. At the same time, the design allows easy access to the main components, which is what maintenance does fast and hassle-free, reducing downtime and ensuring maximum efficiency.

The CIMEX Trowelmax 160 petrol twin trowel kit includes the machine, two transport wheels and a hitch for manual travel.

The machine ships in a sturdy wooden crate, providing protection during transport and safe storage until installation. Its commissioning takes no more than 15-20 minutes, the process being quick and easy even for operators without specialized technical training.

It is important to note that the machines are not filled with fuel and engine oil, which means that before initial launch it is necessary to add the consumables recommended by the manufacturer.

Key advantages

• The power it has in front of the single louvers for concrete
• Speed when processing concrete surfaces
• Twice as many blades for concrete grinding, polishing and smoothing
• Operator comfort through easy control
• No need to walk and manually guide the shutter
• Additional LED lighting for better visibility with low power consumption
• Towbar for manual movement and additional wheels
• Electric starter
• System for additional watering of concrete
• Set of ironing trays

Technical specifications

• Number of blades: 8
• Blade dimensions (mm): 270 x 150
• Rotor speed (rpm): from 25 - 165
• Smoothing widthwith trays (no overlap):1600mm
• Smoothing widthwithout trays (no overlap):1500mm
• Smoothing areawith trays (no overlap):1.6m²
• Smoothing areawithout trays (no overlap):1.4m²
• Blade pitch: 0-15 degrees
• Drive shaft (type): Splined
• Dimensions in working condition (L x W x H) (mm) 1930 x 990 x 1300
• Dimensions with packaging (L x W x H) (mm):
• Operating weight with wheels (kg): 300
• Operating weight without wheels (kg): 290

Engine:

• Fuel: Gasoline
• Model: LONCIN
• Working volume: 420 cc
• Power (kW): 9
• Horsepower: 13hp/3600rpm
• Torque: 26N.m / 2500rpm
• Number of cylinders: 1
• Average fuel consumption: 3.5 - 4 liters of gasoline per hour at full load
• Starter: Electric + manual
• Cooling: Air
• Oil capacity: 1.1l.