Electric heater 3.0kW, CIMEX EL3.0C

Electric heater 3.0kW, CIMEX EL3.0C



The compact electric heater Cimex EL3.0C is a practical solution for heating of garages, workshops, construction sites and other premises. It is suitable for both temporary as well as for emergency heating, providing fast and even heating without formation of condensation, without smell and without oxygen consumption.

In construction, the device is extremely useful for maintaining an optimal temperature in winter at plastering, painting and flooring. Depending on thermal insulation of the room, Cimex EL3.0C can heat volume from 27 to 135 m³ at a temperature difference of 30°C.

Thanks to the low noise level, the heater can also be used in offices or living spaces. The Corps is made of galvanized sheet metal with powder coating, which prevents it from heating up and ensures a long service life.

The model CIMEX EL3.0C has built-in overheating protection, two stages of heating, as well as ventilation mode without heating, which allows its use as ventilator. For more economical operation, the device is equipped with thermostat, which automatically switches off when the set temperature is reached and switches on again at a 5°C drop. The heating elements are made of stainless steel for greater durability and reliability.

Technical specifications

• Compact dimensions
• Sturdy and easy to transport construction
• Body made of galvanized sheet, which does not heat up during operation of the device
• Anti-corrosion powder coating
• Thermostat for temperature regulation
• Built-in overheating protection
• Power regulator 0.025 kW (fan) / heating - 1.5/3.0 kW
• Heating without condensation, moisture, odor and oxygen consumption
• Low noise level
• Suitable for offices, restaurants, garages, workshops, etc.
• Protection class IPX4 (protection against splashes in all directions)

Technical specifications

• Model: EL3.0C
• Capacity (kW): 2.0 / 3.0
• Capacity (Btu/h): 5.630 – 11.260
• Capacity (Kcal/h): 1.430 – 2.860
• Voltage (V/Hz): 230 / 50
• Rated current (A): 12.5 – 13.6
• Switch to 1: Off
• Switch to 2: Fan – 25W
• Switch to 3: 2.0 kW
• Switch on 4: 3.0 kW
• Protection: IP24
• Heating volume / 30ºC / (m³): 25 – 123