Laser level green beam 360 degree CIMEX RL4H1V-G

Laser level green beam 360 degree CIMEX RL4H1V-G

aser level 360 degrees (3D) with green beam - 4 horizontal + 1 vertical

The CIMEX RL4H1V-G laser level is a new product from the CIMEX laser level product range. Specially developed and designed for professional use, combining an attractive price and excellent visibility of the green lines. Through its five beams, this self-leveling laser level offers unrivaled convenience when installing suspended ceilings, plasterboard, cladding, tiles, flooring and much more.

Thanks to its characteristics, the simultaneous leveling of the entire room, both horizontally and vertically, becomes easier than ever, and the green rays offer much better visibility at a distance of up to 20 meters.

Cimex RL4H1V-G offers both independent horizontal and vertical leveling, as well as combined. In this way, the laser level also becomes a self-leveling level with cross lines.

Its body, like its red-beam predecessor, is made of rubber-rimmed durable plastic, providing good protection against moisture and dust.

The large "ON/OFF" slide switch is located on the side, which provides unsurpassed convenience even when working with thick protective gloves. 

The switch has two positions:
1. ON – in this position of the slider, the leveler turns on in self-leveling mode.
2. OFF – position for locking the pendulum during transport and storage

The control buttons / “LOCK” and “H/V” / located on the bevel of the housing contribute to the convenience of operation, providing easy access to its functions, even when the laser level with a green beam is positioned in close proximity to a ceiling . By means of the first button ''LOCK'' the locking of the self-leveling mechanism is ensured, which is also known as the "Diagonals" mode. In this mode, the laser level can be used at any angle - especially useful when installing planters, railings, etc.

The second button “H/V” is used to sequentially activate the beams of the laser level. The switch-on sequence is as follows: initial switch-on of the laser level in which a combination of the horizontal beams and the vertical beam is activated. When the button is pressed again, only the horizontal beam is turned on, and with the third press, only the vertical beam is turned on. 

When the laser level with a green beam is outside the self-leveling range / LOCK OFF /, the laser beams are switched off. After reactivating this mechanism, the CIMEX RL4H1V-G laser level self-levels in just a few seconds. 

The power supply of the level is provided by 4 pcs. batteries AA 1.5 V. This provides significantly longer working time compared to levels in this class. The batteries are located in a convenient bed located below the control buttons, equipped with an easy-to-fasten cover.

If you want to use the laser level with a stand, there is a threaded hole with a ¼ thread in the lower part of its housing. 

In conclusion, it can be said that the Cimex RL4H1V-G Green Beam Laser Level offers a combination of all useful features at an affordable price. It is an indispensable assistant in construction and assembly activities in all conditions, guaranteeing accuracy and a long service life. 

Standard equipment:

• Laser level 360 degrees green beam CIMEX RL4H1V-G – 1 pc.
• Batteries AA 1.5 V - 4 pcs.
• Bag for storage and transport - 1 pc.

Specifications:

• Working range: up to 20 m.
• Laser diode: 520 nm, < 1 mW
• Laser class: 2
• Self-leveling time: 4 sec.
• Accuracy: ± 0.3 mm. / m.
• Self-leveling range: 4 degrees
• Tripod Mount Thread: 1/4"
• Weight: 0.4 kg.
• Power supply: 4 pcs. AA batteries
• Warranty: 24 months