Wood Chippers for Branches up to 10, 12 & 15 cm
Professional Petrol Wood Chippers for Branches up to 10, 12 and 15 cm
CIMEX petrol wood chippers process branches and woody garden waste produced by pruning, land clearance and professional landscaping. The range includes machines for branches up to 100, 120 and 150 mm in diameter, plus a hydraulic-feed model for more intensive work. Petrol power allows operation outdoors and away from the electrical grid, making these machines suitable for orchards, farms, parks, large properties, municipal grounds and work sites.
Why use a wood chipper?
After pruning or clearance, whole branches occupy considerable space and are difficult to transport. A wood chipper processes them directly on site into compact wood chips.
- Substantially reduces the volume of woody waste
- Simplifies collection, loading and transport
- Speeds up post-pruning clearance
- Reduces manual handling
- Allows wood chips to be reused
- Operates without mains electricity
- Can be moved between work areas
Clean wood chips may be used for mulch, garden paths or composting, or transported more efficiently than whole branches.
Professional petrol wood chippers
Unlike small electric garden shredders, CIMEX petrol wood chippers are intended for thicker branches and larger volumes. Depending on the model, the range offers engines up to 15 hp, drum-cutting systems, direct feed and hydraulic automatic feed. Choose the capacity that matches the real workload—from periodic use on a large private property to professional orchard, park and grounds maintenance.
How to choose a wood chipper
Maximum branch diameter
The stated maximum diameter indicates the largest woody material a model is designed to process. Select a machine with reserve capacity above the diameter handled most often. Actual capacity also depends on wood species and hardness, moisture content, branch shape, side growth, blade condition and feeding consistency. Very dry hardwood may place a greater load on the machine than fresh wood of the same diameter.
Engine power
A more powerful petrol engine provides additional reserve for thicker branches and intensive use. Power should be assessed together with the cutting-system design, maximum branch diameter and feed method. A compact model may suit moderate, occasional workloads, while frequent professional use calls for higher capacity.
Direct or hydraulic feed
With direct-feed machines, the operator guides branches into the hopper for the cutting mechanism to draw in. A hydraulic feed system pulls material toward the cutting drum more evenly, reduces physical effort and is especially useful when processing large quantities.
Mobility and transport
Consider how the machine will be moved around a site, loaded, transported between addresses and stored. Depending on the model, transport wheels, a tow bar and a removable hopper can simplify handling and transport.
Typical applications
- Orchards: process seasonal pruning waste directly where it is produced.
- Parks and green spaces: maintain public areas, hotel grounds and large facilities.
- Farms: clear volunteer growth, old plantings and woody waste around agricultural buildings.
- Professional landscaping: reduce waste volume on site and speed up completion.
- Large gardens and estates: handle regular pruning more efficiently than a small electric shredder.
How a wood chipper works
Branches enter through the feed hopper and reach the cutting drum. High-speed knives chip the wood, after which the discharge chute directs the material toward a trailer, container, prepared pile, composting area or the ground. Chip size and shape depend on the wood, branch diameter, machine design and blade condition.
Maintenance and safe operation
Regularly check blade sharpness and fastening, belt condition and tension, engine oil, air filter, fuel system, bearings, moving joints, hopper and discharge chute, plus the hydraulic system where fitted. Worn blades reduce output and increase load on the engine and cutting system.
Only trained operators should use a wood chipper in accordance with the instructions for the specific model. Wear eye or face protection, hearing protection, suitable gloves, close-fitting workwear and safety footwear. Never feed stones, metal, wire, soil, plastics or construction debris. Stop the engine and wait for the cutting mechanism to become completely stationary before clearing a blockage, cleaning or servicing the machine.
Frequently asked questions
What branch diameters can CIMEX wood chippers process?
Depending on the model, the stated maximum is 100, 120 or 150 mm. Practical capacity varies with wood species, moisture, shape and hardness.
Can these chippers operate without electricity?
Yes. The machines in this category use petrol engines and can work outdoors or at remote sites.
Can dry branches be chipped?
Yes, although dry wood is usually harder and can place more load on the engine and blades, reducing the practical maximum diameter.
Are they intended for leaves and soft green material?
Their primary purpose is branches and woody material. Large quantities of wet, soft or fibrous vegetation may restrict discharge and cause blockages.
What is the advantage of hydraulic feed?
It draws branches toward the cutting mechanism and reduces the need for manual pushing and guidance, improving operation with large volumes.
Can the chips be used as mulch?
Yes. Chips from healthy wood can be used for mulching, paths and composting. Material from diseased or infested trees should be managed carefully to avoid spreading pests or disease.
Explore CIMEX professional petrol wood chippers and compare branch capacity, engine power, feed system and transport features to select the right machine for your workload.
