Laser level with green beam CIMEX SL1H4VG

Laser level with 5 green beams, glasses and suitcase

The CIMEX 1H4VG green beam self-leveling laser level is a professional linear cross line laser level (one horizontal and four vertical beams) . Intended for professional indoor and outdoor use. Thanks to the green laser beam, this self-leveling laser level features excellent line visibility in daylight.

Designed for professional everyday use, the multi-line laser level with green beams is used for all types of leveling activities in the installation of plasterboard, suspended ceilings, plumbing, electrical, furniture, doors, flooring, wall construction and many other. Unlike commercially available laser levels, the CIMEX 1H4VG self-leveling linear laser level features very good accuracy and thin and clear lines.

Equipped with an additional point laser , projecting a point to the floor, the level is practically equipped with a full-fledged plumb line. Using the projection of the point laser on the floor and the intersection of the cross lines on the ceiling, you can easily determine the positions of the plumb points. level projects 2 intersecting rays (cross) on the ceiling of the room and an additional point on the floor.

Green beam laser level 1H4VG As standard, the laser level is equipped with a mini tripod rotating 360 degrees and a screw for precise and fine adjustment of the position of the vertical beams. The legs of the tripod have a screw mechanism for pre-adjustment of the level within the range allowing self-leveling.

The self-leveling system, the laser level has a light signal, indicating by flashing the beams, whether the beams are leveled.

The housing of the green beam laser level is made of solid impact-resistant plastic and is lined with rubberized elements to protect the prisms from impact.

In the upper part, the control buttons are located , allowing independent projection of one horizontal line, horizontal + 2 vertical lines, horizontal + 4 vertical lines and a point on the floor. To increase the working range of the level in receiver operation mode, the button labeled "outdoor" serves.

The self-leveling mechanism is magnino-pendulum. In the released position, it is responsible for the precise horizontal and vertical positioning of the beams, and the magnetic element serves to reduce (quench) oscillations and increase the speed of self-leveling.

The switch, located on the side of the housing , serves to turn on and off the level and release / lock the magnetic pendulum mechanism. During transport and storage, this switch should be set to the "OFF" position.

To power the self-leveling laser level with green rays, a Li-Ion rechargeable battery is used, which is tailored to the power required for powering the leveler and has a capacity of 1750 mAh, so that, depending on the mode and the number of rays used, it can provide a duration of operation with one charge 8-10 hours.

The CIMEX 1H4VG self-leveling linear laser level is supplied in a case complete with goggles to protect and increase the visibility of the beam, a lithium-ion battery, a battery charger, a target.