Manual Core drilling machine up to 160 mm CIMEX DCD160.

Manual Core drilling machine up to 160 mm CIMEX DCD160.

A manual diamond core drilling machine for core drilling holes with a diameter of up to 160 mm.

The CIMEX DCD160 is a manual machine designed for use with wet diamond core drills. It is suitable for drilling holes in concrete (up to 130 mm) and masonry. To ensure safety during operation, the core drilling machine is equipped with a protective clutch that safeguards the operator in case of a jam or blockage.

The powerful 2300W motor is equipped with a soft start system, built-in ground fault protection, and overload protection. The robust gearbox is constructed from steel. To ensure a stable grip during drilling, the machine has an extended arm on the side handle. The water cooling system is included as a standard part of the kit and features a quick-connect nozzle for convenience.

The built-in leveling indicators, one for horizontal and one for vertical alignment, ensure the correct positioning of the machine.

The spindle of the core drill machine has threads 1 ¼ UNC.

Handheld diamond core drilling machines are primarily used in construction for precise drilling of holes in walls and slabs.

Standard equipment:

• Core drilling machine - 1 pc.
• Side handle - 1 pc.
• Cooling system for the diamond core bit
• Soft-start system
• Residual current device (RCD) protection
• Overcurrent protection
• Core bit changing key - 1 pc.
• Storage case - 1 pc.

An additional stand can be purchased for the core drilling machine, which serves to stabilize the machine during operation and allows for more precise and accurate drilling. (See the image above.)

Technical Specifications:

• Maximum drilling diameter in masonry: 160 mm
• Maximum drilling diameter in concrete: up to 130 mm
• Power supply voltage: 220V/50 Hz
• Rated power: 2300 W
• Spindle mount: 1 ¼ UNC thread
• No-load speed: 100 - 1900
• Weight: 7 kg
• Weight with packaging: 9 kg
• Dimensions with packaging (L x W x H): 550 x 140 x 340 mm